Energy Corridor AR Magazine

As any gun or rifle owner in Energy Corridor knows, proper care means regular cleaning of the basic firearm parts. For the novice, this may seem like an intimidating task, but by following the proper steps, the gun or rifle can be cleaned safely and effectively. There are many guides that walk gun owners through the basics of cleaning gun parts, but it is always best to follow any special instructions provided by the firearm manufacturer.

Gun Store

Best STI in Energy Corridor

When you buy a firearm in Energy Corridor and you decide to clean it later, before you do anything else, first Unload the gun. Make sure that the gun is completely unloaded. Check the chamber and the barrel to make sure that it is free and clear of bullets. Never skip this most important first step.

Second, move to a well-ventilated work area with a large, flat surface to work on. The gun chemicals in Energy Corridor that will be used for cleaning have a strong odor, so proper ventilation is a must. The table or workbench should be covered by a soft cloth where the gun can be taken apart without worry of scratching or damage.

Then take out the gun cleaning kit designed for the type of gun being cleaned along with a supply of clean rags. There are different cleaning kits for different types of guns. If you own more than one type of firearm in Energy Corridor, there are also cleaning kits that are made to work with a variety of gun types. They are called Universal Cleaning kits and can usually be found at any gun or hunting supply store. The basic pieces of the cleaning kit include the following: a gun chemical cleaning solvent, oil for lubrication, a cleaning rod with clips and cleaning patches. Some kits also include a small brush, but a toothbrush will work just as well.

AK47

Reliable Hunting Equipment - Some Tips On Right Selection

As any gun owner knows, proper care means regular cleaning of the basic gun parts. For the novice, this may seem like an intimidating task, but by following the proper steps, the gun can be cleaned safely and effectively. The guide below walks gun owners through the basics of cleaning gun parts, but it is always best to follow any special instructions provided by the gun's manufacturer.

Step 1

Unload the gun. Before doing anything else, make sure that the gun is completely unloaded. Check the chamber and the barrel to make sure that it is free and clear of bullets. Never skip this most important first step.

Step 2

Move to a well-ventilated work area with a large, flat surface to work on. The gun chemicals that will be used for cleaning have a strong odor, so proper ventilation is a must. The table or workbench should be covered by a soft cloth where the gun can be taken apart without worry of scratching or damage.

Step 3

Take out the gun cleaning kit designed for the type of gun being cleaned along with a supply of clean rags. There are different cleaning kits for different types of guns. If you own more than one type of firearm, there are also cleaning kits that are made to work with a variety of gun types. They are called Universal Cleaning kits and can usually be found at any gun or hunting supply store. The basic pieces of the cleaning kit include the following: a gun chemical cleaning solvent, oil for lubrication, a cleaning rod with clips and cleaning patches. Some kits also include a small brush, but a toothbrush will work just as well.

Step 4

Now it is time to begin the cleaning process. Dip the brush or toothbrush in the chemical cleaning solvent and clean the inside of the cylinder and gun frame. Although these areas may be dirty, with proper and consistent cleaning, they will not have an excessive build up of dirt and debris. After scrubbing, wipe the areas with a clean, dry rag to remove the dirt and chemical cleaner.

Step 5

Attach a cleaning patch to the end of the cleaning rod using a clip provided. Soak the cleaning patch with gun chemical cleaning solvent until it is saturated, but not dripping. Slowly push the rod into the barrel, cleaning the inside of the gun as it is pushed through. Replace the dirty, wet cleaning patch with a clean one and soak it with solvent when the rod pokes through the other end of the barrel. Continue cleaning the barrel this way, replacing the cleaning patch each time it comes through the barrel. It may take four or five times before the barrel is completely clean and a dry patch slides through with no residue left on it.

Step 6

The final step is to lubricate the gun parts with the oil that came in the cleaning kit. Attach a fresh cleaning patch to the end of the cleaning rod, soak it in oil and slide it into the gun's barrel and back out again. Then, using a clean rag, apply a small amount of oil to the moving parts of the gun, testing them along the way to make sure that they are in good working order.

Once the gun is cleaned, put away the gun chemicals and work cloth. Take the time to store things neatly, so that the next time the gun is ready to be cleaned they can be easily found. Gun care is about being meticulous, patient and sticking to a routine. With the proper care and cleaning, a gun can last a lifetime.

45ACP Ammo

Choosing the Best Hunting Equipment

Gun shops, as Federal Firearms Licensees (FFLs) handle hundreds of thousands of background checks every year for their customers. It can be a somewhat emotionally charged process for the purchaser. You have decided to purchase a firearm. You have shopped. You have found the one that fits you and worked out the best price with the dealer you want to work with. You are ready to buy. Now comes the background check. If you are new to this process, some nervousness and uncertainty are not uncommon. What will the result be? Will you be able to purchase the firearm that you already feel is yours, or will all your careful work making your selection be for naught? It can be even more nerve-wracking if you are trying to reclaim a firearm that you have put into pawn temporarily, a family heirloom perhaps. Most gun and pawn shops have seen just about every scenario. While complications do happen, this does not have to be a fear-filled process.

A little knowledge helps to ease most fears. First, lets give a little exposition about what the background check system is. Background checks for firearm purchases became the law of the land with the Brady Handgun Violence Prevention Act, and on November 1st, 1998 Individual states were given the option to use the national system for this or establish their own. The State Legislature mandated that the system must meet or exceed the requirements established by The Brady Act. In addition to the check against the records, the State unit runs a check against the NICS (National Instant Check System) on both the prospective purchaser and the firearm they intend to purchase. This assures that the person is legally able to purchase a firearm and that there is nothing negative in the history of the firearm itself, in the case of previously owned firearms.

What is important to remember about background checks for firearm purchases is that the process is not about judging your worth as a person. They are about making sure that firearms are only sold to people who are legally allowed to purchase them. Sometimes the systems employed by the government are slow or incomplete in their information. If you believe that you should legally be allowed to exercise your Second Amendment rights, but your background check says otherwise, there is a recourse. While it will often take several days or sometimes even a few weeks to get the result changed to reflect the correct information, all is not lost. Just follow the rules and be patient. So, remember to bring your driver's license, leave about 30 minutes before the store closes for the background check, be patient and breathe easy. Your gun shop owner and or dealer is there to help.


http://gunsunlimited.pro/houston-tx/